Media information

 April 8, 2015

New security requirement in revised Building Regulations gains support from DHF

The Door & Hardware Federation (DHF) has welcomed the publication of the long-awaited new Building Regulations which - for the first time in England - require new homes to incorporate provisions to resist unauthorised access.

The new requirement, and the accompanying Approved Document Q of the Building Regulations covering door and window security, takes effect in October this year and will apply to all dwellings in England.

The new requirement covers main entrance doors, windows and interlinked doors to integral garages in houses. The requirement also covers external entrance doors to apartment blocks and to individual apartment doors that open into common areas.

The new Approved Document states that doors and windows will meet the new security requirements if they can resist physical attack by a casual or opportunist burglar. To do this they must be both robust and be fitted with appropriate hardware.

The DHF represents the UK's leading manufacturers of door and window hardware and locks. Its general manager and secretary Michael Skelding said:

"We've campaigned alongside Secured by Design for a long time to have security incorporated into the Building Regulations. So we are particularly pleased that, at last, builders of new homes will have to ensure they provide enhanced levels of security for occupants."

Approved Document Q gives guidance on how the requirements can be met by installing complete entrance doorsets which meet the security requirements of British Standards publication PAS 24:2012 or other standards that provide similar or better performance. A Kitemark, or other third party certification, demonstrates a doorset's compliance with PAS 24:2012.

A bespoke door assembly, which has not been supplied as a complete doorset, should have a multipoint locking system which meets the requirements of PAS 3621 (or its variants PAS 8621 or PAS 10621 depending on the method of key operation). Single point locking systems must conform to BS 3621 (or its variants BS 8621 or BS 10621). The presence of a Kitemark on both PAS 3621 and BS 3621 locks is the assurance that the lock meets the standards.

Door letter plates should meet the requirements of technical specification DHF TS 008:2012.

All easily accessible windows should meet the security requirements of PAS 24:2012. Windows that satisfy other standards that provide similar or better performance are also acceptable under the Approved Document.

Added Michael Skelding: "The Housing Standards Review is streamlining the regulatory process to increase the number of new homes being built. Achieving increased security of homes was a key aim within the review. Properties built after October this year will feature levels of security that will provide real defence against break-in attempts."

Approved Document Q can be downloaded fromhttp://www.planningportal.gov.uk/uploads/br/BR_PDF_AD_Q_2015.pdf.For more information on door and lock standards and specifications visit the DHF websitewww.dhfonline.org.uk.

end

The DHF represents all the key players in the following sectors: locks & architectural hardware, industrial/commercial doors, garage doors, powered gates and metal & timber doorsets. With the ultimate aim of maintaining and raising quality standards throughout the industry, all DHF members must meet minimum standards of competence and customer service. They all operate within a Code of Conduct governing standards of workmanship, quality assurance, training, safety, business integrity and CE marking compliance.

Issued on behalf of the DHF by

Ainsworth Public Relations

0161 427 3861

guy@ainsworth-pr.co.uk

Door & Hardware Federation

01827 52337

www.dhfonline.org.uk